Fees for Services as of January 01, 2007

Residential
Residential Room by Room HVAC Load Calculations 
Per Room Charge $6.00 Minimum

$60.00
HVAC Load Update $30.00
Residential Energy Code Calculations (with load calculations)*
UP To 1500 Sq Ft $25.00 4501-5000 Sq Ft $60.00
1501-2000 Sq Ft $30.00 5001-5500 Sq Ft $65.00
2001-2500 Sq Ft $35.00 5501-6000 Sq Ft $70.00
2501-3000 Sq Ft $40.00 6001-6500 Sq Ft $75.00
3001-3500 Sq Ft $45.00 6501-7000 Sq Ft $80.00
3501-4000 Sq Ft $50.00 7001-7500 Sq Ft $85.00
4001-4500 Sq Ft $55.00 7501-8000 Sq Ft $90.00
Stand Alone Residential Energy Code Calculations (without load calculations)*
UP To 1500 Sq Ft $85.00 4501-5000 Sq Ft $120.00
1501-2000 Sq Ft $90.00 5001-5500 Sq Ft $125.00
2001-2500 Sq Ft $95.00 5501-6000 Sq Ft $130.00
2501-3000 Sq Ft $100.00 6001-6500 Sq Ft $135.00
3001-3500 Sq Ft $105.00 6501-7000 Sq Ft $140.00
3501-4000 Sq Ft $110.00 7001-7500 Sq Ft $145.00
4001-4500 Sq Ft $115.00 7501-8000 Sq Ft $150.00
*NOTE: For multi-story homes ADD $15.00/story.   Residential Code update is $25.00.
Short Form (600-C) $25.00
Residential HVAC System Design (minimum charges...call for quote)
Per Register Charge $12.50
Each Duct System $25.00
Equipment Specifications 
(if needed) $25/System

Commercial
Commercial Energy Code Calculations 
By the Zone* First Zone $150.00   Additional Zones $50.00 each
*Zone:  A space or group of spaces within a building with any combination of heating, cooling, or lighting requirements sufficiently similar do that desired conditions can be maintained throughout by a single controlling device.  A zone can also be a non-conditioned space such as a manufacturing area, service and repair area, etc. inside a structure and has specific lighting for related work.
Commercial HVAC Load Calculations 
Per Room Charge $8.50 Minimum

$85.00
Commercial HVAC System Design 
Per Register Charge $12.50
Each Duct System $25.00
Equipment Specifications 
(if needed) $25/System
Mid-Point (Smoke) Tests, Energy Ratings, Diagnostics and Consulting 
Mid-Point Smoke Tests**
Calcs-Plus will temporarily seal all registers.  Tape to remain on register boxes to prevent dirt and construction debris from entering the ductwork. Air conditioning contractor will be present to seal any observed leaks. 
First System $325 Additional Systems $75 each
** NOTE: These prices are for local work areas.  For charges outside of local work areas, please call.
Energy Ratings
Class 1 Energy Ratings (fees vary by volume of houses, number of duct systems, proximity, number of houses available for testing at a given time, etc…Call for quote)
Diagnostics and Consulting 
Diagnostic test of air conditioning system return and supply CFM and duct system static pressure with report: $75.00 per hour, 3 hour minimum.
On site diagnostics and consulting: Minimum $225 for on site consultation and data collection…call for quote.